67 Commits

Author SHA1 Message Date
Wolfvak
a42dbedf82 fix screenshot functionality 2019-06-03 02:28:26 +02:00
Wolfvak
6823e15584 enable write buffering on VRAM, optimize some UI drawing algorithms 2019-06-03 02:28:25 +02:00
Wolfvak
bb5182cae3 skip unnecessary fixed point conversion + multiplication in touchscreen reading code 2019-06-03 02:28:25 +02:00
Wolfvak
50e97d2dab Moved most things to RGB565 2019-06-03 02:28:25 +02:00
d0k3
dbd8b8aca8 Included software keyboard in testing 2019-06-03 02:28:25 +02:00
d0k3
ca8c2070f5 Change how TouchboxGet() works 2019-06-03 02:28:25 +02:00
d0k3
f4fc17f145 Tweak button delay in hid.c 2019-06-03 02:28:24 +02:00
d0k3
c3152838db Move touchbox functions to hid.c / hid.h 2019-06-03 02:28:24 +02:00
d0k3
ff9fde1561 With shell closed, use the LED to signal finished operations 2019-06-03 02:27:44 +02:00
d0k3
df21331218 New & improved touchscreen playground 2019-06-03 02:27:44 +02:00
Wolfvak
77f857ab64 - added way to prevent a race condition when reading the touchscreen values
- simplified CODEC init and read code
- fixed I2C register

thanks to @profi200 for the last two points
2019-06-03 02:27:44 +02:00
d0k3
54caa3588e Added touchscreen calibration from NVRAM (thanks @wolfvak) 2019-06-03 02:27:44 +02:00
d0k3
36c03e578c Enable screenshots in touch test functions 2019-06-03 02:27:44 +02:00
d0k3
500333b011 Some source code reorganisation 2019-06-03 02:27:43 +02:00
d0k3
bc66cd0ccf Improved touchscreen calibration GUI & playground 2019-06-03 02:27:43 +02:00
Wolfvak
ad9a9bd5a0 - turn off the LCDs when the lid closes, and turn them back on when it's open
- reset LEDs on boot
- add code to set the notification LED
- add a PXI command to verify the NVRAM is actually online
- notify the ARM9 about the shell state through the HID thing
2019-06-03 02:27:43 +02:00
Wolfvak
79aa9191f7 - clamp down the touchscreen coordinates to boundaries
- fix annoying compilation warning regarding unsigned vs signed comparison
2019-06-03 02:27:42 +02:00
Wolfvak
70757e3385 - added extremely simple calibration dialog, to be replaced by something prettier/saner/safer at a later point in time
- moved all SPI code to the ARM11
- reimplemented NVRAM reading for the new SPI interface
2019-06-03 02:27:42 +02:00
Wolfvak
1b04ca4fa1 - added touchscreen calibration code
- added very simple 12-bit precision fixed point arithmetic code as a fast float replacement
2019-06-03 02:27:42 +02:00
Wolfvak
bf45ee3900 - added new SPI and CODEC drivers ported from linux, thanks to xerpi
- circle pad simulates dpad keys (up, right, down, left)
- raw touchscreen data is provided but currently unused
- added a simple shared memory region thing
- fixed the 10ms delay to be _after_ the backlights are turned on, thanks to profi again

as always, other stuff I probably forgot about
2019-06-03 02:27:42 +02:00
Wolfvak
f5a877d00b - implemented MCU stuff and its interrupts, thanks @profi200 for the info
- moved brightness control to the ARM11
- moved HID updating to the ARM11
- moved screen init from ARM9 to the ARM11, always performed unconditionally
- removed unnecessary SCREENINIT and SET_BRIGHTNESS pxi commands

and other stuff I probably forgot about
2019-06-03 02:27:41 +02:00
Wolfvak
5e56cd2f77 - refactored arm11/sys.c
- moved common.h from the ARM9 tree to the common code tree
- does proper deinit now on the ARM11 side

the bug that caused it to fail to launch some FIRMs has been fixed - it can even boot stock FIRMs
2019-06-03 02:27:41 +02:00
Wolfvak
2f86686388 renamed most low level functions and other stuff to fit with the current theme
- added initial SCU twiddling
- added very untested and unusable SMP code
- fixed race condition that happened on boot
- added initial MMU code (just super basic identity mapping, no caching set up or anything)
- enabled some of the fancier ARMv6 features
- reorganized ARM11 files into their own folders
- possibly more stuff I'm forgetting about
2019-06-03 02:27:41 +02:00
Wolfvak
e70b8ab116 - unified CPU/cache header that works on C and asm code
- added legacy boot PXI command that allows power savings on ARM11
2019-06-03 02:27:41 +02:00
Wolfvak
987b820c4a beginning of better ARM11:
- moved I2C code to the ARM11 (with an ugly hack that MUST be fixed)
- reworked the PXI protocol to have lower latencies and remove any potential async support
2019-06-03 02:27:41 +02:00
d0k3
151e6389ac Use iomemcpy for registers (thanks @profi200) 2019-04-17 00:45:48 +02:00
luigoalma
6a95643edb Very minor optimization
It only effect happens at common misaligned memory check and fixup
Does the exact same end result, just in less 2 instructions and independent of r4 and r5, using r12 instead
2019-04-16 00:41:31 +02:00
d0k3
d762c390af CPPCheck audit, several fixes 2019-03-21 00:42:39 +01:00
luigoalma
1e2b45941b revert seqmemcpy and memcpy reimplementation 2019-03-15 00:48:24 +01:00
Eix
c644820e41 re-order the keyboard string to make renaming stuff less annoying 2019-03-15 00:34:42 +01:00
windows-server-2003
732165153b Implemented new file selector 2019-03-15 00:34:41 +01:00
d0k3
82d6e94789 Fix compiling in devkitARM r51
Use custom (sequential) memcpy for reading / writing hardware registers.
Fixes #460
2019-03-13 01:36:33 +01:00
d0k3
f40ec898cf Also include derreks sighax signature
in the source, currently not used
2018-07-30 01:03:15 +02:00
windows-server-2003
c10f6d1f9e Fix potential buffer overflows 2018-06-14 12:37:42 +02:00
Hyarion Sanyënóna
ffa5eaaae4 Progress bars will not draw to screen faster than 30 Hz 2018-06-14 00:44:43 +02:00
d0k3
bdf635e39d Fix a potential buffer overflow
thanks @windows-server-2003 !
2018-06-04 00:52:45 +02:00
windows-server-2003
46f67e1d18 Fix sprintf format vulnerability 2018-05-17 00:29:03 +02:00
d0k3
0caf2a6cbb Scripting: add keysel command 2018-04-25 15:25:07 +02:00
d0k3
b0997fa687 Improved string display handling
should fix #344 for good
2018-04-17 23:44:53 +02:00
d0k3
f34fcf6fa3 Added GodMode64 and BrickedMode9 FLAVORs 2018-04-04 23:28:30 +02:00
Wolfvak
8c121ae1d3 Faster PNG compression, enabled separate data and function sections. 2018-04-03 01:17:58 +02:00
Wolfvak
c6e3c0ee30 Save screenshots as PNGs. 2018-04-03 01:17:58 +02:00
d0k3
46090fde0a Use datetime stamp for screenshot names 2018-03-17 18:09:43 +01:00
d0k3
ac514669a1 Properly handle UTF-8 filenames 2018-03-16 03:00:26 +01:00
d0k3
67e19ad574 Allow screenshots (almost) everywhere 2018-03-07 01:15:12 +01:00
d0k3
988f2634b0 Fix #316 2018-02-26 23:16:43 +01:00
d0k3
93485ac287 Fixed all occurences of VGAME_BUFFER 2018-02-07 00:43:21 +01:00
d0k3
cdf72bbdc2 Fix all occurences of SCRIPT_BUFFER 2018-02-07 00:43:20 +01:00
d0k3
ae6c1c61c1 Fix all occurences of VCART_BUFFER 2018-02-07 00:43:20 +01:00
d0k3
7927c742c6 Fix all occurences of NAND_BUFFER & SDCRYPT_BUFFER 2018-02-07 00:43:20 +01:00