d0k3
ca8c2070f5
Change how TouchboxGet() works
2019-06-03 02:28:25 +02:00
d0k3
f4fc17f145
Tweak button delay in hid.c
2019-06-03 02:28:24 +02:00
d0k3
c3152838db
Move touchbox functions to hid.c / hid.h
2019-06-03 02:28:24 +02:00
d0k3
ff9fde1561
With shell closed, use the LED to signal finished operations
2019-06-03 02:27:44 +02:00
d0k3
df21331218
New & improved touchscreen playground
2019-06-03 02:27:44 +02:00
Wolfvak
77f857ab64
- added way to prevent a race condition when reading the touchscreen values
...
- simplified CODEC init and read code
- fixed I2C register
thanks to @profi200 for the last two points
2019-06-03 02:27:44 +02:00
d0k3
54caa3588e
Added touchscreen calibration from NVRAM (thanks @wolfvak)
2019-06-03 02:27:44 +02:00
d0k3
36c03e578c
Enable screenshots in touch test functions
2019-06-03 02:27:44 +02:00
d0k3
500333b011
Some source code reorganisation
2019-06-03 02:27:43 +02:00
d0k3
bc66cd0ccf
Improved touchscreen calibration GUI & playground
2019-06-03 02:27:43 +02:00
Wolfvak
ad9a9bd5a0
- turn off the LCDs when the lid closes, and turn them back on when it's open
...
- reset LEDs on boot
- add code to set the notification LED
- add a PXI command to verify the NVRAM is actually online
- notify the ARM9 about the shell state through the HID thing
2019-06-03 02:27:43 +02:00
Wolfvak
79aa9191f7
- clamp down the touchscreen coordinates to boundaries
...
- fix annoying compilation warning regarding unsigned vs signed comparison
2019-06-03 02:27:42 +02:00
Wolfvak
70757e3385
- added extremely simple calibration dialog, to be replaced by something prettier/saner/safer at a later point in time
...
- moved all SPI code to the ARM11
- reimplemented NVRAM reading for the new SPI interface
2019-06-03 02:27:42 +02:00
Wolfvak
1b04ca4fa1
- added touchscreen calibration code
...
- added very simple 12-bit precision fixed point arithmetic code as a fast float replacement
2019-06-03 02:27:42 +02:00
Wolfvak
bf45ee3900
- added new SPI and CODEC drivers ported from linux, thanks to xerpi
...
- circle pad simulates dpad keys (up, right, down, left)
- raw touchscreen data is provided but currently unused
- added a simple shared memory region thing
- fixed the 10ms delay to be _after_ the backlights are turned on, thanks to profi again
as always, other stuff I probably forgot about
2019-06-03 02:27:42 +02:00
Wolfvak
f5a877d00b
- implemented MCU stuff and its interrupts, thanks @profi200 for the info
...
- moved brightness control to the ARM11
- moved HID updating to the ARM11
- moved screen init from ARM9 to the ARM11, always performed unconditionally
- removed unnecessary SCREENINIT and SET_BRIGHTNESS pxi commands
and other stuff I probably forgot about
2019-06-03 02:27:41 +02:00
Wolfvak
5e56cd2f77
- refactored arm11/sys.c
...
- moved common.h from the ARM9 tree to the common code tree
- does proper deinit now on the ARM11 side
the bug that caused it to fail to launch some FIRMs has been fixed - it can even boot stock FIRMs
2019-06-03 02:27:41 +02:00
Wolfvak
2f86686388
renamed most low level functions and other stuff to fit with the current theme
...
- added initial SCU twiddling
- added very untested and unusable SMP code
- fixed race condition that happened on boot
- added initial MMU code (just super basic identity mapping, no caching set up or anything)
- enabled some of the fancier ARMv6 features
- reorganized ARM11 files into their own folders
- possibly more stuff I'm forgetting about
2019-06-03 02:27:41 +02:00
Wolfvak
e70b8ab116
- unified CPU/cache header that works on C and asm code
...
- added legacy boot PXI command that allows power savings on ARM11
2019-06-03 02:27:41 +02:00
Wolfvak
987b820c4a
beginning of better ARM11:
...
- moved I2C code to the ARM11 (with an ugly hack that MUST be fixed)
- reworked the PXI protocol to have lower latencies and remove any potential async support
2019-06-03 02:27:41 +02:00
d0k3
151e6389ac
Use iomemcpy for registers (thanks @profi200)
2019-04-17 00:45:48 +02:00
luigoalma
6a95643edb
Very minor optimization
...
It only effect happens at common misaligned memory check and fixup
Does the exact same end result, just in less 2 instructions and independent of r4 and r5, using r12 instead
2019-04-16 00:41:31 +02:00
d0k3
d762c390af
CPPCheck audit, several fixes
2019-03-21 00:42:39 +01:00
luigoalma
1e2b45941b
revert seqmemcpy and memcpy reimplementation
2019-03-15 00:48:24 +01:00
Eix
c644820e41
re-order the keyboard string to make renaming stuff less annoying
2019-03-15 00:34:42 +01:00
windows-server-2003
732165153b
Implemented new file selector
2019-03-15 00:34:41 +01:00
d0k3
82d6e94789
Fix compiling in devkitARM r51
...
Use custom (sequential) memcpy for reading / writing hardware registers.
Fixes #460
2019-03-13 01:36:33 +01:00
d0k3
f40ec898cf
Also include derreks sighax signature
...
in the source, currently not used
2018-07-30 01:03:15 +02:00
windows-server-2003
c10f6d1f9e
Fix potential buffer overflows
2018-06-14 12:37:42 +02:00
Hyarion Sanyënóna
ffa5eaaae4
Progress bars will not draw to screen faster than 30 Hz
2018-06-14 00:44:43 +02:00
d0k3
bdf635e39d
Fix a potential buffer overflow
...
thanks @windows-server-2003 !
2018-06-04 00:52:45 +02:00
windows-server-2003
46f67e1d18
Fix sprintf format vulnerability
2018-05-17 00:29:03 +02:00
d0k3
0caf2a6cbb
Scripting: add keysel command
2018-04-25 15:25:07 +02:00
d0k3
b0997fa687
Improved string display handling
...
should fix #344 for good
2018-04-17 23:44:53 +02:00
d0k3
f34fcf6fa3
Added GodMode64 and BrickedMode9 FLAVORs
2018-04-04 23:28:30 +02:00
Wolfvak
8c121ae1d3
Faster PNG compression, enabled separate data and function sections.
2018-04-03 01:17:58 +02:00
Wolfvak
c6e3c0ee30
Save screenshots as PNGs.
2018-04-03 01:17:58 +02:00
d0k3
46090fde0a
Use datetime stamp for screenshot names
2018-03-17 18:09:43 +01:00
d0k3
ac514669a1
Properly handle UTF-8 filenames
2018-03-16 03:00:26 +01:00
d0k3
67e19ad574
Allow screenshots (almost) everywhere
2018-03-07 01:15:12 +01:00
d0k3
988f2634b0
Fix #316
2018-02-26 23:16:43 +01:00
d0k3
93485ac287
Fixed all occurences of VGAME_BUFFER
2018-02-07 00:43:21 +01:00
d0k3
cdf72bbdc2
Fix all occurences of SCRIPT_BUFFER
2018-02-07 00:43:20 +01:00
d0k3
ae6c1c61c1
Fix all occurences of VCART_BUFFER
2018-02-07 00:43:20 +01:00
d0k3
7927c742c6
Fix all occurences of NAND_BUFFER & SDCRYPT_BUFFER
2018-02-07 00:43:20 +01:00
d0k3
1b236acc86
Setup heap testing
2018-02-07 00:43:18 +01:00
d0k3
a0d2d27b06
Replace TEMP_BUFFER & MAIN_BUFFER with heap
2018-02-07 00:43:18 +01:00
d0k3
0fa9f52b08
Added PCX bitmap viewer
...
Fixes #299
2018-01-23 02:00:02 +01:00
d0k3
98bc5f00ec
Better handling for tiny fonts
2018-01-16 00:43:09 +01:00
d0k3
5df8c4b739
New, easier to edit font format
2018-01-15 01:49:04 +01:00